Brisbane's Trusted PPF Installer, KPN Detailing

Keep Your Brisbane Car's Paint Factory Fresh

KPN Detailing installs self-healing paint protection film that guards your paint against stone chips, scratches and UV damage, quote back within the hour.

Get a Free Quote Now

Or call now: 0438 271 298

Why Brisbane Drivers Are Protecting Their Paint with PPF

Brisbane roads are hard on paint. Highway gravel, concrete dust from construction zones, flying debris on the Gateway and M1, every drive puts your clear coat at risk. Stone chips are not cosmetic. They expose bare metal, invite rust, and cost far more to fix than to prevent.

Paint protection film creates a near-invisible barrier that takes the hit so your paint does not. The self-healing top coat closes up light scratches on its own when exposed to heat. Your car comes out of a car wash looking the same as the day the film went on.

For resale value, it matters more than most people realise. A car with clean, chip-free paint in the Queensland sun sells faster and holds more value than one showing the usual bonnet and bumper wear. PPF is the one protection product that actually pays you back.

Get a Free Quote Now

What a Proper Paint Protection Film Looks Like

Before-and-after examples of the standard we work to on every job.

Before Paint Protection Film BEFORE
After Paint Protection Film AFTER
Before Paint Protection Film BEFORE
After Paint Protection Film AFTER

Paint Protection Film Packages

Choose the level of protection that's right for your vehicle.

Partial Front

  • ✓ Full bonnet coverage
  • ✓ Front bumper bar coverage
  • ✓ Both front guards covered
  • ✓ Mirror caps included
  • ✓ Film edges tucked and sealed where possible
  • ✓ Post-install inspection and clean-down
Get a Free Quote

Full Body

  • ✓ Everything in Full Front
  • ✓ Full roof panel coverage
  • ✓ All four doors fully wrapped
  • ✓ Rear bumper bar and boot lid covered
  • ✓ Rear guards and quarter panels
  • ✓ Full vehicle inspection before and after installation
Get a Free Quote

The Paint Protection Film Process

1

Quote and Coverage Consultation

You send through your vehicle details and tell us what level of coverage you are after. Kyle reviews the job, asks any questions, and gets a quote back to you fast, no vague ballpark figures, no waiting days for a reply.

Under 1 hour
2

Paint Inspection and Decontamination

Before any film goes on, the paint gets a full decontamination wash, clay bar treatment and close inspection under lighting. Any existing contamination or surface debris trapped under the film will show forever, so this step gets done properly.

45 to 90 minutes
3

Surface Paint Correction if Required

If the paint has swirl marks, light scratches or water etching, those get addressed before installation. PPF locks in what is underneath it. Clean paint in means clean paint stays that way.

1 to 3 hours depending on condition
4

Film Cutting and Installation

The film is computer-cut to your specific vehicle using precision pattern software, then wet-installed panel by panel. Edges are tucked into door jambs, gaps and seams wherever the vehicle design allows, so there are no visible lifting edges.

3 to 8 hours depending on coverage tier
5

Cure Period and Final Handover

Once the film is on, it needs time to bond fully to the paint. Kyle walks you through what to avoid in the first few days, then hands the car back with a full overview of your coverage and warranty documentation.

24 to 48 hour cure before first wash
Get a Free Quote Now

Paint Protection Film FAQ

PPF pricing varies based on the coverage tier, vehicle size and paint condition going in. KPN Detailing offers Partial Front, Full Front and Full Body options, each quoted individually so you only pay for what your vehicle actually needs. Get a free quote and you will have a firm number within the hour.
A Partial Front typically takes four to six hours. A Full Front runs six to eight hours. A Full Body installation is usually spread across one to two full days depending on the vehicle. The paint decontamination and any correction work are done before the film goes on and are included in that timeframe.
Quality PPF installed correctly lasts ten or more years in Brisbane conditions. The film resists UV yellowing, does not peel under normal circumstances and holds up to regular washing and detailing without issue. Longevity comes down to the quality of the product used and how well the surface was prepared before installation.
No special routine is needed. Regular washing is fine after the initial cure period of around 48 hours. Avoid high-pressure jets aimed directly at film edges. A ceramic coating applied over the top of the film makes maintenance even easier and adds an extra layer of surface protection.
Yes. The film KPN Detailing installs carries a manufacturer-backed warranty covering yellowing, cracking, peeling and delamination. Warranty terms are provided in writing at handover. If anything goes wrong with the film itself under normal use, you are covered.
They do different jobs. Ceramic coating makes the surface hydrophobic and easier to keep clean, and adds a layer of chemical and UV resistance. PPF physically absorbs stone chips, road debris and scratches that would otherwise damage the paint. The two products work well together, many KPN clients run PPF underneath a ceramic top coat for full protection.
A quality gloss PPF is nearly invisible on the car. It deepens the paint slightly and adds a wet-look shine. Matte PPF is also available for vehicles with factory matte or satin finishes. The film should not be detectable by eye unless someone is looking for it up close.
Yes. KPN Detailing services Brisbane, Logan and Ipswich. Get in touch with your location and vehicle details and Kyle will confirm availability and get a quote back to you quickly.

Get Your Paint Protected Before the Next Drive Chips It

KPN Detailing installs paint protection film across Brisbane, Logan and Ipswich, quote back within the hour, no obligation.

Or call now: 0438 271 298